Monet PC5220 Manual del operador descargar pdf (Pagina 70)

Square-Ground Filing

GULLET FILING

Approximately every 5th sharpening, clean out gullets

by filing them back with a 7/32" round file. File gullets

from the inside out (the side opposite from sharpening).

Always leave a 1/8" shelf behind the gullet.

BEFORE AFTER

If not cleaned out regularly, the outer edge of your gul-

lets will eventually prevent the working corners of your

cutters from getting an adequate bite into the wood.

DEPTH-GAUGE SETTING

The depth-gauge setting for all square-ground

chisel chain is .025."

NOTE

.025

WWrroonngg

Little or no clearance

between the working corner

and the gullet’s outer edge.

RRiigghhtt

Clearance is maintained

between the working corner

and the gullet’s outer edge.

25436_Txt_2005.qxd 9/20/2004 12:16 PM Page 66

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 101 102

Sin comentarios

Monet PC5220 Manual del operador Pagina 70